Savin C3210 - Manual (Page 15)

5
Control Panel
Note
❒ This illustration shows the Control Panel of the machine with options fully in-
stalled.
1. Screen Contrast knob
Adjusts the brightness of the display pan-
el.
2. {{{{User Tools/Counter}}}} key
• User Tools
Press to change the default settings
and conditions to meet your require-
ments.
• Counter
Press to check or print the Counter
value.
• Inquiry
Shows where to order expendable
supplies and where to call when a
malfunction occurs. You can also print
these details.
3. Indicators
These indicators show the status of the
machine or indicate errors.
4. {{{{Adjust/Program Color}}}} key
Use this key to adjust and register colors.
⇒ p.73 “Color Adjustment/Program”
Note
❒ When image quality is adjusted, the
lamp in the {{{{Adjust/Program Color}}}} key
is lit.
5. Color Circle
Refer to this when adjusting colors.
⇒
p.73 “Color Adjustment”
6. Display panel
Shows operation status, error messages,
and function menus.
7. {{{{Check Modes}}}} key
Press to check the entered copy job set-
tings.
8. {{{{Program}}}} key
Press to select the program mode.
⇒ p.82
“Programs”
9. {{{{Clear Modes}}}} key
Press to clear the previously entered copy
job settings.
10. {{{{Energy Saver}}}} key
Press to switch to and from the Energy
Saver mode.
⇒ “General Settings Guide”
11. {{{{Interrupt}}}} key
Press to interrupt a long copy job to make
copies.
⇒ p.18 “Interrupt Copy”
12. Main power indicator
This indicator goes on when the main
power switch is turned on and goes off
when the switch is turned off.
UranosC1-ENcopyA_F1_FM.book Page 5 Friday, July 26, 2002 5:01 PM