Savin C3210 - Manual (Page 26)

Placing Originals
16
1
BBBB
Press [Mixed Size], and then press
[OK]
.
CCCC
Align the rear and left edges of
the originals as shown in the il-
lustration.
1. Place into the document feeder
2. Vertical size
DDDD
Adjust the guide to the widest
original size.
EEEE
Place the aligned originals face
up into the document feeder.
FFFF
Press the
{{{{Start}}}} key.
Placing Custom Size Originals
When placing custom size originals in
the document feeder, specify the size
of the originals.
Note
❒ Paper that has a vertical length of
105-297 mm (4.2" – 11.6") and a
horizontal length of 128-432 mm
(5.1" – 17.0") can be placed with
this function.
AAAA
Press [Special Original].
BBBB
Press [Custm Size Origi.].
CCCC
Enter the horizontal size of the
original with the Number keys,
and then press [#].
Note
❒ If you make a mistake, press
[Clear] or the {{{{Clear/Stop}}}} key,
and then enter the value again.
DDDD
Enter the vertical size of the origi-
nal with the Number keys, and
then press [#].
EEEE
Press [OK].
FFFF
Place your originals, and then
press the
{{{{Start}}}} key.
A3 1
2
CP19AE
A4
UranosC1-ENcopyA_F1_FM.book Page 16 Friday, July 26, 2002 5:01 PM