Savin C3210 - Manual (Page 16)

6
Important
❒ Do not turn the main power off
while the main power indicator is
flashing. The hard disk may mal-
function.
13. Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
14. {{{{Sample Copy}}}} key
Use this key to make a single sample
copy before starting a long copy run. By
checking the sample copy and making
any necessary changes to the image qual-
ity settings before you make multiple
copies, you can save time and paper.
⇒
p.41 “Sample Copy”
15. {{{{Start}}}} key
Press to start copying. Press to start scan-
ning and printing in Document Server
mode.
16. {{{{Clear/Stop}}}} key
• Clear
Press to delete a number entered.
• Stop
Press to stop a copy job in progress.
17. {{{{#}}}} key
Press to enter a value.
18. Number keys
Use to enter the desired number of copies
and data for selected modes.
19. Color Selection Key
Use these key to switch color functions:
⇒ p.25 “Color Functions”
{{{{Auto Color Select}}}}
{{{{Full Color}}}}
{{{{B & W}}}}
{{{{Single Color}}}}
{{{{Two-color}}}}
20. Function keys/Function Status
indicator
These keys switch display to the operat-
ing screen of each functions. Follow the
instructions displayed by switching be-
tween screen with the function keys.
These show the status of the above func-
tions:
• Yellow: the function is selected
• Green: the function is active
• Red: the function has been interrupted
Common Key Operations
The following keys are common to all screens.
[Exit] Returns to the previous screen.
[Cancel] Deletes a selected function or entered values, and then returns
to the previous screen.
[OK] Acknowledges a selected function or entered values, and then
returns to the previous screen.
[
▲Previous] [▼Next]
Moves to the previous or the next page when all the functions
cannot be displayed on one page.
UranosC1-ENcopyA_F1_FM.book Page 6 Friday, July 26, 2002 5:01 PM