Savin C3210 - Manual (Page 47)

Copy Functions
37
2
Size Magnification
This function calculates an enlarge-
ment or reduction ratio based upon
the lengths of the original and copy.
Note
❒ Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
AAAA
Press [Reduce/Enlarge].
BBBB
Press [Specifd. Ratio].
CCCC
Make sure that [Specifd. Ratio] is
highlighted.
DDDD
Enter the length of the original
with the number keys, and then
press [#].
Note
❒ You can enter sizes within the
following ranges.
EEEE
Enter the length of the copy with
the number keys, and then press
[#]
.
Note
❒ To change the length after
pressing [#], select [Original] or
[Copy]
and enter the desired
length.
FFFF
Press [OK].
GGGG
Press [OK].
HHHH
Place your original, and then
press the
{{{{Start}}}} key.
Directional Magnification (%)
Copies can be reduced or enlarged at
different reproduction ratios horizon-
tally and vertically.
a. Horizontal ratio
b. Vertical ratio
Note
❒ You can also select a preset ratio
which is close to the desired ratio
by using [Reduce] or [Enlarge], then
adjust the ratio with [
n n n n] or [o o o o].
Metric
version 1 – 999mm (in 1mm steps)
Inch
version 0.1" – 99.9" (in 0.1" steps)
Ainch ainch
a%
b%
UranosC1-ENcopyA_F1_FM.book Page 37 Friday, July 26, 2002 5:01 PM