Savin C3210 - Manual (Page 72)

Copying
62
2
Reference
Related Initial Settings
⇒ p.104 “Stamp Position 1 - 4”
⇒ p.104 “Stamp Format 1 - 4”
⇒ p.104 “Stamp Color : 1 - 4”
AAAA
Register a user stamp.
Reference
⇒ p.62 “To program the user
stamp”
BBBB
Press [Edit/Color Creation].
CCCC
Press [Stamp].
DDDD
Press [User Stamp].
EEEE
Select the stamp you require.
FFFF
Press [All Pages] or [1st Page only] to
select the print page.
Note
❒ You can change the stamp color
and position.
⇒ p.62 “Changing
the stamp color” ⇒ p.62 “To
change the stamp position”
GGGG
After making all settings, press
[OK]
.
HHHH
Press [OK].
IIII
Set the original, then press the
{{{{Start}}}} key.
Changing the stamp color
AAAA
Press [Stamp Color].
BBBB
Select the stamp color, then press
[OK]
.
To change the stamp position
AAAA
Press [Change].
BBBB
Select the desired position, and
then press [OK].
To program the user stamp
Note
❒ The range of stamp images for
readability is 10-297mm high (0.4"-
11.7") and 10-432mm (0.4"-17")
wide.
❒ Up to four images that you use fre-
quently can be stored in the ma-
chine's memory.
AAAA
Make sure that the machine is in
Copy mode.
UranosC1-ENcopyA_F1_FM.book Page 62 Friday, July 26, 2002 5:01 PM