Savin C3210 - Manual (Page 115)

Accessing the User Tools (Copier/Document Server Features)
105
5
❖ ❖ ❖ ❖ Page Numbering in Combine
You can set how the pages are
numbered when you use the Com-
bine function and Page Number-
ing function together.
❖ ❖ ❖ ❖ Stamp on Designated Slip Sheet
You can select whether to print the
page number onto slip sheets
when you use the Designate func-
tion set to "Copy" and Page Num-
bering function together.
❖ ❖ ❖ ❖ Stamp Position
P1, P2... Stamp Position: 1/5, 2/5...
Stamp Position: –1–, –2–... Stamp
Position: P.1, P.2... Stamp Position:
1, 2... Stamp Position: 1–1, 1–2...
You can set the position at which
the stamp is printed.
Press the arrow keys to adjust the
position.
❖ ❖ ❖ ❖ Superimpose
You can select whether page num-
bers are printed in white when
they overlap black parts of the im-
age.
This function is valid when in
Black & White mode.
❖ ❖ ❖ ❖ Stamp Color
You can set the selected priority
color when printing pages.
Input/Output
❖ ❖ ❖ ❖ Switch to Batch (SADF)
You can select whether Batch
mode or SADF mode is displayed
when you press the Special Origi-
nal key.
⇒ p.14 “Batch mode”
❖ ❖ ❖ ❖ SADF Auto Reset
When you set one original at a time
in the document feeder, the Auto
Feed
indicator lights for a selected
time after an original is fed to show
that the document feeder is ready
for another original. You can ad-
just this time from 3 seconds to 99
in 1 second increments.
❖ ❖ ❖ ❖ Rotate Sort: Auto Paper Continue
You can specify whether to contin-
ue copying when the paper of the
required orientation has run out
during rotate-sorting.
⇒ p.39 “Ro-
tate Sort”
Note
❒ If you select [No] :
• When paper of the required
orientation runs out, the ma-
chine stops copying and
prompts you to supply copy
paper. When you load paper,
the machine will continue
copying.
❒ If you select [Yes] :
• Copying continues using
copy paper of a different ori-
entation. The copy job will
finish even if you have left
the machine.
❖ ❖ ❖ ❖ Auto Sort
You can specify whether Sort
mode is selected when the ma-
chine is turned on or the mode is
cleared.
❖ ❖ ❖ ❖ Memory Full Auto Scan Restart
When the memory becomes full
while scanning originals, the ma-
c hine can m ake copies of the
scanned originals first, and then
automatically proceed scanning
the remaining originals.
You can enable or disable this
function.
UranosC1-ENcopyA_F1_FM.book Page 105 Friday, July 26, 2002 5:01 PM