Savin C3210 - Manual (Page 63)

Copy Functions
53
2
AAAA
Select the size of the copy paper
and the reproduction ratio.
BBBB
Press [Edit/Color Creation].
CCCC
Press [Edit Image].
DDDD
Press [Image Repeat].
EEEE
Confirm that [Whole Area] is select-
ed, then press [OK].
FFFF
Press [OK].
GGGG
Place your original, and then
press the
{{{{Start}}}} key.
Specified Area Repeat
You can use this function only when
you are making a copy from the Ex-
posure Glass.
Note
❒ The base point X1, Y1, and the
length set by point X2, Y2 deter-
mines the area of an image repeat-
edly copied.
1. Set on the exposure glass
AAAA
Specify the location of the area's
base point (X1, Y1), and its length
and width (X2, Y2).
Note
❒ You can set any value in the range
of X1: 0~412mm (0.8”~16.2”),
X2: 20~432mm (0.8”~17”), Y1:
0~277mm (0.8”~10.8”), and Y2:
20~297mm (0.8”~11.6”).
BBBB
Select the size of the copy paper
and the reproduction ratio.
CCCC
Press [Edit/Color Creation].
DDDD
Press [Edit Image].
EEEE
Press [Image Repeat].
FFFF
Press [Specified Area].
GGGG
Enter the length of [X1] with the
number keys, then press [#].
HHHH
Enter the length of [Y1] with the
number keys, then press [#].
IIII
Enter the length of [X2] with the
number keys, then press [#].
JJJJ
Enter the length of the [Y2] by
number keys, then press [#].
KKKK
Press [OK].
LLLL
Press [OK].
MMMM
Press [OK].
NNNN
Place the original on the exposure
glass, and then press the
{{{{Start}}}}
key.
UranosC1-ENcopyA_F1_FM.book Page 53 Friday, July 26, 2002 5:01 PM