Savin C3210 - Manual (Page 85)

Color Balance
75
3
Changing the registered contents
AAAA
Press the
{{{{Adjust/Program Color}}}}
key.
BBBB
Confirm that [Color Balance] is se-
lected, and press [Program Color
Balance]
.
CCCC
Select the program number (1–3)
to be changed.
The programmed color balance ap-
pears.
DDDD
Change the registered contents.
EEEE
After the programmed contents
are changed, press [Program Color
Balance]
.
FFFF
Press [Program], and then press the
program number key to be over-
written.
GGGG
Press [Register].
The program is changed.
HHHH
Press [OK].
Copying with the registered contents
AAAA
Press the
{{{{Adjust/Program Color}}}}
key.
BBBB
Make sure that [Color Balance] is
selected, and then press [Program
Color Balance]
.
CCCC
Make sure that [Recall] has been
selected, and then select the pro-
gram number registered by the
color balance to be used.
DDDD
Press [OK].
EEEE
Place your originals, and then
press the
{{{{Start}}}} key.
Note
❒ After copying has been com-
pleted, either performing the
Auto Clear function or pressing
the
{{{{Clear Modes}}}} key deletes the
recalled contents.
Deleting the registered contents
AAAA
Press the
{{{{Adjust/Program Color}}}}
key.
BBBB
Make sure that [Color Balance] has
been selected, and then press [Pro-
gram Color Balance]
.
CCCC
Press [Delete], and then select the
program number registered by
the color balance to delete.
DDDD
Press [Yes].
EEEE
Press [OK].
UranosC1-ENcopyA_F1_FM.book Page 75 Friday, July 26, 2002 5:01 PM