Savin C3210 - Manual (Page 33)

Copying from the Bypass Tray
23
2
When Copying on the Back
Side of Paper
Using the Bypass Tray, you can make
copies on the back side of pages that
have already been copied on the front
side.
Note
❒ Do not use paper that has been
used in other copying machines or
printers.
❒ Copies made on the back side of
paper should be originals that
have a low image area ratio, such
as text originals.
Copying and Placement Orientation of
Originals and Paper
Pay close attention to the placement
orientation of paper and originals.
❖ ❖ ❖ ❖ Top to top
❖ ❖ ❖ ❖ Top to Bottom
AAAA
Open the Bypass Tray, and then
adjust the guides to the paper
size.
BBBB
Gently insert the copied paper
with the copied side face down
(the non-copied side face up) un-
til the beeper sounds.
CCCC
Press the {{{{#}}}} key, and then select
the paper size.
DDDD
In Special Paper, select [Plain:
Dup.Back]
or [Thick: Dup.Back], and
then press [OK].
EEEE
Place your originals, and then
press the
{{{{Start}}}} key.
GGH33E
GGH44E
UranosC1-ENcopyA_F1_FM.book Page 23 Friday, July 26, 2002 5:01 PM