Savin C3210 - Manual (Page 37)

Color Functions
27
2
Selecting from [User Color]
A Press [User Color].
B Select from the registered
colors, then press [OK].
GGGG
After selecting all the colors to be
converted, press [OK].
HHHH
Set the original, and then press
the
{{{{Start}}}} key.
Erase Color
You can copy by erasing a certain
color in the image of the original.
Note
❒ It is possible to select up to 4 colors.
❒ You can adjust the range of the
color to be deleted in 5 levels. If the
color range is set to “Wider” and
red is specified, magenta and or-
ange may also be deleted. The
color range can be adjusted in the
“User Tools”.
⇒ p.106 “Color Sen-
sitivity”
AAAA
Press [Edit/Color Creation].
BBBB
Press [Color Creation].
CCCC
Press [Erase Color].
DDDD
Select the color to be erased.
Note
❒ You can cancel the selection by
pressing the selected (highlight-
ed) key.
❒ You can erase 4 colors at once.
EEEE
Press [OK] after selecting all the
colors to be deleted.
FFFF
Set the originals, and then press
the
{{{{Start}}}} key.
Color Background
Copies by adding a color in the whole
page.
Note
❒ Since the Color Background func-
tion overprints the entire original,
the color of the image may change.
AAAA
Press [Edit/Color Creation].
BBBB
Press [Color Creation].
CCCC
Press [Color Background].
DDDD
Select the background color, then
press [OK].
Note
❒ You can adjust the density of
each color in 4 levels.
❒ You can cancel the selection by
pressing the selected (highlight-
ed) key.
UranosC1-ENcopyA_F1_FM.book Page 27 Friday, July 26, 2002 5:01 PM