Savin AC205 - Manual (Page 318)

Page 3-10 Administrator Guide
Ne
twor
k
Ins
ta
lla
tio
n
Us
in
g In
ter
n
e
t Se
rv
ic
e
s SNMP
Use these instructions to configure the Simple Network Management Protocol (SNMP) using
Web Image Monitor Type 103.
Configure SNMP
To configure SNMP, perform these steps:
¾ Enable Web Image Monitor Type 103 (see “Enabling Internet Services” on page 3-5).
¾ At the Web Image Monitor Type 103 Home Page for the Type 103, select the [Network
Settings] tab.
¾ Select [SNMP] and check the Protocol Configuration details are correct. If any of the
details are incorrect then enter the correct information.
¾ Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
SNMP Traps
1
2
3
4
Parameter Name Description Default
Maximun
Length
Enable Authentication
Traps: Enable or disable the
authentication traps. ON
Enable Address Pair 1 to
5 Enable/Disable the IP Address
and community name. OFF
IP Address 1 to 5 the IP Address of the host to
which the SNMP Traps should be
directed. 0.0.0.0
Community Name 1 to 5 The community name to which
the host belongs. NULL 14