Savin AC205 - Manual (Page 45)

G ETTING S TARTED 2.20
Setting the Date and Time
The current date and time are shown on the display when your
machine is on and ready to work. For this machine, all of your
faxes will have the date and time printed on them.
N OTE : If power to the machine is cut off, you need to reset the
correct time and date once the power has been restored.
1 Press Menu until “Machine Setup” appears on the top line
of the display.
2 Press the scroll button ( or ) to display “Date & Time” on
the bottom line and press Enter.
3 Enter the correct time and date using the number keypad.
Month = 01 ~ 12
Day = 01 ~ 31
Year = requires four digits
Hour = 01 ~ 12 (12-hour mode)
00 ~ 23 (24-hour mode)
Minute = 00 ~ 59
N OTE : The date format may differ from country to country.
You can also use the scroll button ( or ) to move the
cursor under the digit you want to correct and enter a new
number.
4 To select “AM” or “PM” for 12-hour format, press the or
button or any number button.
When the cursor is not under the AM or PM indicator,
pressing the or button immediately moves the cursor
to the indicator.
You can change the clock mode to 24-hour format (e.g.
01:00 PM as 13:00). For details, see page 2.21.
5 Press Enter when the time and date on the display is
correct.
When you enter a wrong number, the machine beeps and
does not proceed to the next step. If this happens, just
reenter the correct number.