Savin AC205 - Manual (Page 242)

10
U SING USB F LASH D RIVE 10.9
6 When the display asks you to confirm your selection, select
“Yes” to format the USB flash drive.
To cancel your selection, select “No” by pressing the scroll
button ( or ).
Viewing the USB Memory Status
You can check the amount of memory space available for
scanning and saving documents.
1 Make sure that the USB flash drive is inserted into the USB
port in the front of the machine. If necessary, insert the
USB flash drive. See page 10.2.
2 Press Scan-to on the control panel.
The first available menu item, “USB Memory,” appears on
the bottom line of the display.
3 Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item, “Auto
Scan,” appears on the bottom line of the display.
4 Press the scroll button ( or ) until you see “Check Space”
on the bottom line and press Enter.
5 The available memory space appears on the display.
To return to the Standby mode, press Clear/Stop.