Savin AC205 - Manual (Page 249)

U SING Y OUR M ACHINE ON A N ETWORK A.4
9 In the Enter a port name field, enter the shared name.
10 Click OK and click Close.
11 For Windows NT 4.0, click OK.
For Windows 2000/XP, click Apply and click OK.
Setting Up a Network-Connected
Machine
You have to set up the network protocols on the machine to use
it as your network printer.
You can configure the basic network parameters through the
machine’s control panel. Use the machine’s control panel to do
the following:
• Print a Network Configuration Page
• Configure TCP/IP
Configuring Network Parameters on the
Control Panel
Supported Operating Systems
N OTES :
• The operating systems supported by the network card may be
different from the operating systems supported by the machine.
The following table shows the network environments supported
by the machine.
• Printer driver does not support Windows 95.
• TCP/IP: Transmission Control Protocol/Internet Protocol
Item Requirements
Network Interface 10/100 Base-TX
Network Operating
System
Windows 98/Me/NT 4.0/2000/XP
Network Protocols TCP/IP on Windows
Dynamic Addressing
Server
DHCP, BOOTP