Solving network printing problems, General problems – Savin AC205 User Manual

Page 231

ROUBLESHOOTING

9.28

Solving Network Printing Problems

General Problems

Condition

Suggested solutions

System does not function

with some wrong values

entered by mistake while

configuring.

Possibly the parameters in the network card are

corrupted. Restart the system and set to factory

Not able to access from

SNMP Manager.

Try pinging from the same system on which SNMP

manager is running. If it does not succeed, there must

be a problem with network connectivity between the

manager and the machine. If ping succeeds, verify that

community names with sufficient permissions have been

used.

You cannot see any of

DHCP server, BOOTP

server or RARP server,

when you want to set IP

address to the machine.

You should set IP address, Subnet Mask and Default

Gateway to the machine using Set IP.

You can not print using

TCP/IP protocol.

1.Check whether TCP/IP protocol is installed in your PC.
2.Check whether your PC is on the same network with

the machine.

The name of printer is

displayed empty while

adding a port and the

printer doesn’t function.

Assign IP Address by using the Set IP.