Sony Ericsson P800 - Manual (Page 58)

58 Phone
This is the Internet version of the user’s guide. © Print only for private use.
• Ring (data) – Select a ring signal for incoming data calls. Tap
the trumpet to listen to the signal. Tap again to stop playback.
• Vibrating alert – Select the option you want.
• Silent mode – Select the checkbox to turn off all sound ring
signals.
To change the default ring tone
1. Tap the Ring (voice) or Ring (data) drop-down menu.
2. Select Default Melody for the P800 default or Find Melody
to select a new one.
3. If required, change folder.
4. Select the required sound
5. Tap and to preview the sound.
6. Tap Select to set this sound.
You can select ring signals that are stored on your local storage
or on Memory Stick. If the selected file is later deleted or
moved, the Default Melody will be played instead.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume may damage hearing.
Incoming call picture
If an incoming caller has a picture stored in contacts it will be
shown on the screen. Select the checkbox to show a large
version of the picture over the whole screen.
Voice control
The voice control option lets you manage calls using your voice.
With Voice answer you can use words recorded for ‘answer’ and
‘busy’ to answer or send a busy signal to an incoming call. With
Voice dialling you can make a call by speaking the contact’s
name.
Say a “magic word” and then the name of the person you want
to call, and the P800 will try to call the person. Instead of the
magic word you can also press and hold the Jog Dial or press the
handsfree set call button.
The magic word ensures that the P800 will not call somebody
whose name has just been mentioned by chance.
• Voice dialling – Select On or Off .
• Magic word – Select the cases where you want to use the
magic word when you use voice dialling. You must,
however, record a magic word before you can select to use it.
Using Magic Word will increase battery drain.
• Voice answer – Select On or Off . Tap On if you want to answer
or reject incoming calls by voice commands. You must first
record voice commands for Answer and Busy.