Sony Ericsson P800 - Manual (Page 154)

154 Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Security
On the Settings tab you can make the following security-related
settings:
• You can set your P800 to different Operation modes :
• You can also set how your P800 should act when receiving
beamed items:
Cable
Use Cable to set the cable connection mode and the connection
parameters used when communicating through your P800's
cable port.
Select Control Panel > Connections and select Cable to:
• Set the cable connection mode. Please note that you must set
the mode to
Modem when using the P800 as a modem and
when using the DUN (Dial-up Networking) Wizard.
• Set the baud rate, parity, number of stop bits, character length
and type of flow control required for the connection. When
connecting your P800 via the desk stand to a USB port on
your PC, use the following (default) settings:
Tip You can set the cable connection mode when the flip is
closed by selecting
Applications > Connections >
Cable.
On All Bluetooth wireless technology functionality from
your P800 works, but you cannot receive beamed
items, and other devices cannot initiate pairing with
your P800.
Auto All Bluetooth wireless technology functionality from
your P800 works but you cannot receive beamed
items, and other devices cannot initiate pairing with
your P800. You cannot use your P800 as a modem, it
is not possible to connect from a PC and voice
dialling from a headset is not possible.
Off Bluetooth wireless technology is turned off. Set this
mode if you do not use Bluetooth, it will decrease
battery drain.
Discoverable All Bluetooth wireless technology functionality from
your P800 works Other Bluetooth-enabled devices
can find and connect to your P800.
Always receive Receives the item automatically.
Ask first You will be shown a Connection request that you
can accept or reject.
Never receive Rejects the item automatically.
Baud rate 460800
Parity None
Stop bits 1
Character length 8
Flow control CTS/RTS