Sony Ericsson P800 - Manual (Page 122)

122 Time
This is the Internet version of the user’s guide. © Print only for private use.
Setting alarms
You can set up to three different alarms in your P800. You can
choose to activate one of the preset alarms, or set a new alarm
with your own definitions.
You can choose to set a silent alarm, where only a message is
displayed when it goes off, or you can set a sound alert.
Alarms requires that the P800 is turned on. If you want to get
alarms in an environment where radio transmitters are not
allowed, you can set the P800 to flight mode, see “Flight mode”
on page 56.
Note If you have connected a stereo headset to the P800, the
alarm will only be heard in the headset.
To activate an existing alarm
• Select the check box in the alarm slot. is displayed on the
status bar on the screen.
To set a new alarm
1. Select > .
2. Select one of the alarm slots.
3. Select Time and choose at what time you want the alarm to go
off. Confirm with .
4. Select When and choose how often you want the alarm to go
off:
– Once The alarm will go off once only, at a time more than
24 hours from now but within the next eight days.
– Next 24 hours Within the next 24 hours.
– Daily Every day at the specified time.
– Weekly Every week at the specified time.
– Workdays Every workday at the specified time.
5. Select Alarm sound and choose a sound.
6. Select Message and choose a preset message or write a new
one.
7. Tap Done .
8. Make sure the check box next to the alarm is selected.
When the alarm goes off, select Snooze to postpone the alarm for
five minutes or Silence to turn off the alarm sound. To turn off
the alarm completely, tap Done .