Sony Ericsson P800 - Manual (Page 20)

20 Getting to know your P800
This is the Internet version of the user’s guide. © Print only for private use.
To restore the factory settings
1. Select Applications > Control panel > Device > Display.
2. Tap Calibrate and the calibrate screen appears.
3. Press the Jog Dial - the text “Factory settings restored” is
shown.
Flip removed
You can use your P800 without the physical flip. Remove the
flip keypad and activate the virtual flip, which gives you the
same functionality as when using the keypad on the real flip.
Enter numbers and characters using your stylus.
Removing and attaching the flip keypad
To remove the keypad
1. To remove the key pad you first have to remove the cover
plate beneath it. Use your fingernails or the back end of the
stylus to gently prize the cover plate off its catches (See
figure). Put your nail or the end of the stylus in the hollow
right below one of the catches and prize the edge of the cover
plate upwards. A distinct click will let you know that the
catch has released. Continue with the second catch.
Note Be careful with the touch-sensitive screen. Never use a
sharp object like a screwdriver.
2. Fold the keypad out and lift away the loose cover plate from
under the keypad.
3. Use your nails or the back end of the stylus to gently pull the
release catch in the same direction as the arrow. The key pad
is now loose and may be lifted off.
2
P R I Z E H E R E
1