Sony Ericsson P800 - Manual (Page 55)

Phone 55
This is the Internet version of the user’s guide. © Print only for private use.
Hints and smart functions
Speakerphone
If you open the flip during a call, the speaker phone function is
activated and the volume will increase. This lets you continue
the conversation while using other functions of the P800.
Close the flip or tap to switch off the speakerphone.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume may damage hearing.
Silent mode
In silent mode all sound ring signals and sound alarm signals are
turned off. When the flip is closed, press
and select Turn on
silent to put the phone in silent mode. Press and select Turn
off silent to turn off silent mode. When the flip is open, tap the
sounds icon in the status bar to open a dialogue where you can
switch silent mode on or off.
The vibrating alert still works in silent mode if not deactivated.
Set-up speed dial numbers
Speed dial is a fast way to call one of nine selected phone
numbers. The view contains nine speed dial positions. Each
speed dial entry consists of a picture or an icon, and a name or a
number. The names, numbers and pictures shown in the Speed
dial view are derived from the Contacts application, see
“Contacts” on page 100. If the contact has a picture stored then
this picture is used. A default icon is used if the contact does not
have a stored picture.
To set a speed dial number
1. Select from the button bar.
2. Select an empty position.
3. Select the desired contact.
4. Select Done .
To remove a speed dial number
1. Select , on the button bar.
2. Select Edit > Remove speed dial .
3. Select the contact to remove.
4. Select Done .