Incoming calls, Options during or after a call – Sony Ericsson P800 User Manual
Page 49

Phone
49
This is the Internet version of the user’s guide. © Print only for private use.
To end a call
•
Press
, or press the Jog Dial.
Short cuts
•
Press and hold
to dial your voice mail. With the flip
open, select
Phone > Call voice mail
.
See “Voice mail” on page 61 on how to set up voice mail.
•
Press and hold any of the keys from
to
to open
your Contact list. Press again to reach the next letter.
Additional key presses will add letters to you search.
•
Press any digit followed by
to reach a phone number in
the SIM phone book.
•
Press
for the last dialled number.
Incoming calls
When you receive a call, if the calling party is found in contacts,
the name of the caller will be displayed. If there is an associated
picture it will also be shown in a small or large version. See
“Incoming call picture” on page 58.
To handle an incoming call
You can press
to answer the call or answer by voice
control, see “Voice control” on page 58.
You can press
to reject a call and press
to silence the
ring signal.
An incoming call will bring up the following options:
•
1 Answer
– Answer the call.
•
2 Send Busy
– Reject the call. The calling party will hear a
busy tone and the call will be logged as a rejected call.
•
3 Mute
– Silence the ring signal. The calling party will not
notice that you have silenced the call. The call will be logged
as a missed call.
If a large picture of the caller fills the screen, you can use the
Jog Dial to get the menu with the options above.
Options during or after a call
Use the Jog Dial to change the phone volume during a call.
Press
to get a list of call handling options. The list will
vary depending on the situation. Options that concern two or
more active calls are described in “Handling two or more calls”
on page 52.
•
End call
– End the active call.
•
Hold call/retrieve call
– Put the active call on hold /retrieve the
held call. This is useful if you want to make a new call during
a call.
•
Add to contacts
– Create a new Contacts entry if the phone
number of the active call is known, and not already stored in
Contacts.