beautypg.com

Siemens SIPART PS2 6DR52xx User Manual

Page 80

background image

Preparing for Operation

80

SIPART PS2 Manual

A5E00074631--06

2. Set the parameter with the

-key to “turn”

Display:

3. Switch to the second parameter by pressing the operation mode

key

briefly. This has set automatically to 90°.

Display:

4. Switch on to the following display with the operation mode key

:

5. Start initialization by pressing the key

for longer than 5 s.

Display:

During the initialization phase “RUN1” to “RUN5” appear one after

another in the bottom display (see also structograms in figure 3-35,

page 83 to figure 3-38, page 86).

.

NOTE
The initialization process may last up to 15 minutes depending on the

actuator.

The initialization is complete when the following display

appears:

The top value indicates the total angle of rotation of the actuator

(example 93.5°).
The following display appears after pressing the operation mode key

briefly:

This manual is related to the following products: