Samsung S3F80JB User Manual
Page 344
S3F80JB
Important
Note
2
2.2 FOR NORMAL OPERATING MODE
The S3F80JB/9 is needed to nRESET pin = “1(VDD)” & TEST pin = “0(GND)”
P1.4~1.7
When nRESET pin = “1(VDD)” & TEST pin = “0(GND)”
In the Figure 2, because TEST signal is low(Logic level 0), “outdis” and “data” signal is same to MUX “0” signal.
So, in normal operation, port1.7 doesn’t occurred to toggling phenomenon because of SDAT changing
Timing Diagram of Figure1, Figure2