Sharp IQ-8900 - Manual (Page 53)

Calibrating Each person holds a pen differently. in order for the unit
the touch to be able to respond properly to your individual style of
panel writing, drawing, or selecting touch buttons, the touch
panel must be calibrated.
1. Press and then touch
2. Touch ADJUST LCD.
A submenu appears.
3. Touch ADJUST TOUCH PANEL.
ADJUST
TOUCH PANEL
Please touch the exact center of
al
four cross-points with the
organizer's pen.
4. Touch the center of each of the four crosses with the
touch pen.
If the adjustment is successful, “Adjusted!” appears on
the display. If for some reason the adjustment fails, the
message “Sorry, please try again” will appear. Touch the
of all four crosses again until the touch panel is
calibrated.
Setting the From time to time, the contrast of the LCD display may
LCD have to be adjusted. You may find, for example, that a
trast to suit contrast setting that was fine for the home or office is not
various adequate when outside or on an airplane. Follow the
lighting procedure below to adjust the LCD contrast.
conditions
1. Press and then touch .
2. Touch ADJUST LCD.
A submenu appears.
52