Sharp IQ-8900 User Manual

Page 261

It is beyond the scope of this manual to explain all

aspects of telecommunicating, including modem
protocols, terminal emulation, etc. For further
information, consult your modem manual or a good
book on computer telecommunications.

Changing

To change the settings in any dialing entry,

dialing
entry

1. Select the entry from the Dialing Directory display.

settings

2. Touch

The entry appears in the Setting display.

3. Make any changes you would like.

Touch STORE].

The new settings are stored.

Making a
call

After you have set up the modem with the unit, and made

an entry for the BBS, computer information service, or
other remote computer you want to call, you are ready to

telecommunicate.

1. Open the Terminal mode.

The Dialing Directory appears, showing the entry you

have made. The field on the right indicates the four basic
communications settings-transmission speed, data bits,
parity, stop bits-that you selected for the entry.

TERMINAL

John Smith

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Brad

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Select the entry that you want to call.

3. Touch CONNECT].

The number is

A message should appear

260

This manual is related to the following products:

IQ-8920