Sharp IQ-8900 - Manual (Page 275)

Points to Remember When Using Peripherals
When using IC cards formatted for units other than
Series:
l
Cards that are 3.4 mm thick, such as the and
application cards of the format, cannot
be used with this unit. Forcing these cards into the
unit may cause damage.
l
The and IQ-8802 cards cannot be
used with this unit.
l
The following keys on this unit cannot be used (refer to
the card operation manual as regards the other
keys):
(SEND) (D
A
TE
[P
RINT
SCREEN) (CUT) (MENU)
l
The key mentioned in IC card operation
manuals is re resented b the key on this unit.
Also, the key operation is
performed by
the
then touching and
operation by pressing (2nd)
The displays for these operations might be
different from those in the card manuals.
l
To transfer data from a card, first select card memory,
To transfer data from the unit,
touch PERIPHERALS after
selecting any application on the unit. To use the
Memory Check or Data Deletion functions with a card,
first select card memory then press
.
l
You cannot move the cursor by touching the IC card
window and you cannot highlight text in it by dragging.
Use the cursor keys to move the cursor.
l
When using the IQ-71 1 B,
you can enter data in the
clipboard by pressing However, you
cannot enter data in the clipboard if the amount of free
memory is small.
l
The following cards can be used in conjunction with
most of the unit’s built-in applications. Press
to access these dictionaries while using a
274