Sharp IQ-8900 - Manual (Page 157)

SET PAGE FORMATS
OFF
PAGE SIZE
. . . . . . . . -- . . . . . .
TOP MARGIN
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BOTTOM MARGIN 8
. . . . . . . . . . . . . . . . . "...I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LEFT MARGIN 1
. . . . . . . . . . . . . . . . . . . . . . .
RIGHT MARGIN 4.16
. . . . . . . . ..<.................. . ..I.. . . . . . . . . . . . .
PRINT FONT
2. Move to the PAGE SIZE field and select the size that
corresponds to the size of the paper you will be using in
your printer.
The three page sizes available are Letter (8.5 x 11 in.),
A4 (210 x 297 mm), and Legal (8.5 x 14 in.).
3. Move to the PRINT FONT field and select the font that
you want.
ELITE is a well-known font, which is set at 12 cpi
(characters per inch).
PICA is also a common font, set at cpi.
PS is proportional spacing (spacing between letters is
adjusted depending on the letter’s width), set at 12 cpi.
You will be able to fit more text on a printed page using a
12 cpi font than using a cpi font.
4. Touch (or press to cancel the
settings).
l
Selecting a paper size that your printer is not set up for
may delay or prevent printing. Consult your printer
manual regarding printer set-up.
l
The selected font is not shown on the unit’s display, but
only when printed out. However, you can check the
layout when ELITE or PICA is selected using PAGE
LAYOUT in the application menu. See p. 155. When
PS is selected, the text is displayed on the unit in the
same format as for ELITE.
156