Sharp IQ-8900 - Manual (Page 5)

1
q
2
c l
3
c l
4
5
7
Set the battery replacement switch
on the back of the unit to “REPLACE
BATTERIES” (exposing the red dot).
(Fig. 1)
Slide off the operation battery cover.
(Fig. 1)
replacement
Insert the two batteries atop the
ribbon tab, as shown. (Fig. 2)
switch
Replace the operation battery cover.
(Fig. 3)
Set the battery replacement switch to
“NORMAL OPERATION”. (Fig. 3)
If this is the first time you have
installed batteries in your unit,
proceed to the following steps.
While holding down the key
on the keyboard, push the RESET
button on the back of the unit using
the touch pen or a similar object.
When a message appears, touch to initialize the unit,
completely clearing the memory.
On average, you can expect to get about two months of
battery life based on one hour a day of constant use. Actual
battery life will vary depending on individual use.
See “Getting the Unit Up and Running,” Chapter 1, for details.