Scanned files, Scanned files 90 – IBM Oce TDS400 User Manual
Page 90
90
Océ TDS400 User Manual
▼
Set or Change destination properties
1
Select a destination.
2
From the ‘File’ menu select ‘Properties’ or click the ‘Properties’ button on the
toolbar (see Figure 22).
[22] ‘Properties’ button on the toolbar
The ‘Destination properties’ screen appears as in figure 20 on page 87.
3
Change the destination properties as described in ‘Create a local destination’
on page 86.
Scanned files
The right pane of the Scan Manager contains the scanned files and additional
information about the files. You can view, print and delete these files. You can
also view the file properties.
▼
View a scanned file
1
Select a file in the right pane.
2
From the ‘File’ menu select ‘View’ or click the ‘View’ button on the toolbar
(see Figure 23).
[23] ‘View’ button on the toolbar
Océ View Station LT starts and displays the file.
Note:
When you make a scan Océ View Station LT starts automatically, and
shows the result of the scan.
▼
Print a scanned file
1
Select a file in the right pane.
2
From the ‘File’ menu select ‘Print’ or click the ‘Print’ button on the toolbar
(see Figure 24).
[24] ‘Print’ button on the toolbar
The selected file will be printed with the default settings as defined in the Océ
Settings Editor.