IBM Oce TDS400 - Manual (Page 200)

200 Océ TDS400 User Manual
Maximum folding settings for long
prints
First fold output Stacker 2nd fold Stacker 2nd fold Belt 2nd fold
Paper densi-
ty [g/m
2
]
1 fold
[mm / inch] 2 folds
[mm / inch] 3 folds
[mm / inch] 2 folds
[mm / inch]
60 1220 / 48 1220 / 48 1220 / 48 1220 / 48
75 6000 / 236 2500 / 98 2000 / 79 1220 / 48
110 2500 / 98 1220 / 48 not possible 1220 / 48
Folding settings 75 grams
Output selection Output length Delivery
‘Stacker’ or ‘Belt’ < 2.5 m Delivered on stacker or belt
‘Stacker’ or ‘Belt’ 2.5 m - 6 m First fold only, delivered in
first fold delivery
‘Stacker’ or ‘Belt’ > 6 m
length known at start Unfolded, delivered in IRT
‘Stacker’ or ‘Belt’ > 6 m
length not known at start Possible paper jam
‘Stacker’ or ‘Belt’
‘First fold only’ selected < 6 m Delivered in first fold delivery
‘First fold only’ > 6 m
length known at start Unfolded, delivered in IRT
‘First fold only’ > 6 m
length not known at start Possible paper jam
Folding settings 110 grams
Output selection Output length Delivery
‘Stacker’ or ‘Belt’ < 1.22 m
(3 folds)
Delivered in first fold delivery
Stacker’ or ‘Belt’ < 1.22 m
(2 folds)
Delivered on stacker or belt
Stacker’ or ‘Belt’ > 1.22 m
< 2.5 m
Delivered in first fold delivery
Stacker’ or ‘Belt’ > 2.5 m Unfolded, delivered in IRT
Stacker’ or ‘Belt’
‘First fold only’ < 2.5 m Delivered in first fold delivery
‘First fold only’ > 2.5 m Unfolded, delivered in IRT