IBM Oce TDS400 - Manual (Page 171)

Printer Supplies and Maintenance 171
[86] Cutting the tape at the knife section
6 Close the side door of the reinforcement unit.
Empty he waste box
If a reinforcement unit is installed, the protective sheet from the reinforcement
tape is stored in a waste box. For each roll of tape the box should be emptied
twice.
Note: You can empty the waste box while the printer is running.
▼ How to empty the waste box
1 Open the waste box by first pulling it to the left hand side and next pulling it
towards you.
[87] Opening the waste box
2 Empty the box.