beautypg.com

Copy jobs, Copy jobs 52 – IBM Oce TDS400 User Manual

Page 52

background image

52

Océ TDS400 User Manual

Copy jobs

Your printer system has a 1 roll or 2 roll unit. Use the Media key, on the scanner
operator panel, to select a roll, or to select the manual feed on the printer.

Note:

You must set the media type on the printer.

You can make 1:1 copies and you can decrease or increase your original from
25% to 400%. You can set the zoom value in fixed steps or in% steps. The
default zoom is set in the Océ Settings Editor.

The Océ TDS400 cuts the paper to the length of the original, the synchro cut.
If you select the standard cut mode, the copy is cut at a standard length, (see
‘Set synchro or standard cut’ on page 64)
.

The automatic exposure gives background-free copies from most
line-drawings. Select the correct original type if you have an extremely dark or
light original, or an original with pasted parts or photographs (see ‘The
exposure settings’ on page 58).

With the Océ TDS400 you can do a number of basic tasks. These tasks include:

Turn on, turn off the scanner

Make copies

Select the required media

Select the manual feed

Specify the zoom factor

Select the exposure setting

Select to add or remove a strip

Select the input mode

Select the output mode

Select extra settings

Deliver originals after scanning

Define settings for the next original

Select autofeed of the original

Stop a copy job