List of available material types and sizes, Material types, List of available material types and sizes 214 – IBM Oce TDS400 User Manual
Page 214: Material types 214, List of available material types and
214
Océ TDS400 User Manual
List of available material types and sizes
Océ machines and materials are matched for optimal quality and performance.
It is therefore recommended to use only approved Océ materials in the Océ
TDS400.
A full list of Océ materials suited for use in the Océ TDS400, including plain
paper, transparent paper, colored papers and various polyester films is
available from your Océ representative.
Material types
The following material types are available for the Océ TDS400:
Material Types
Materials
Weight
Plain paper
64 g/m
2
(55g/m
2
)
Plain paper
75 g/m
2
(110g/m
2
)
Plain paper
80 g/m
2
Biotop paper
80 g/m
2
Green Label
80 g/m
2
Recyonomic
60 g/m
2
Translucent paper
75 g/m
2
Transparent paper
90/95 g/m
2
(80/85g/m
2
)
Transparent paper
110/115 g/m
2
Transparent paper
20 lbs (16 lbs)
Top label paper
60 g/m
2
Vellum
3.5 mil (4 mil)
Film
4.5 mil
Polyester film
3.5 or 4.5 mil
Special
colored paper, etc.
Minimum
Maximum
Width
297 mm
914 mm
Length
420 mm
15 m