To change the password, Automatic logon, To change the password 139 automatic logon 139 – IBM Oce TDS400 User Manual
Page 139
Océ Power Logic®: Remote Logic
139
To change the password
You can change your password on a standard base. You can change the
password for each user mode (except anonymous user mode, for which no
password is required and service operator) by taking the following steps:
▼
Change the password
1
From the ‘File’ menu, select ‘Log on’.
2
Click the ‘Password’ button.
3
Select the correct username in the ‘Username’ drop-down list box.
4
Enter the old password in the ‘Password’ text box.
5
Enter the new password in the ‘New password’ text box.
6
Enter he new password in the ‘Confirm new password’ text box and click ‘OK’
to confirm the new password.
Automatic logon
If you do not want to log on each time you start an application, you can select
the automatic logon function. This option allows you to start an application
automatically in the indicated user mode.
▼
Enable automatic log on
1
From the ‘Edit’ menu, select ‘Options’.
The Options window appears.
2
Select the ‘Enable automatic logon’ check box.
3
Select the correct user mode and enter your password for that user mode.
4
Click ‘OK’. Automatic logon is now enabled.