IBM Oce TDS400 - Manual (Page 26)

26 Océ TDS400 User Manual
Keys
With the keys on the operator panel you can make the settings for the Océ
TDS400 Printer.
The following keys are available
Available keys
Key types Function
On-line key Press the On-line key to put the printer on-line or off-line. To ac-
tivate the program mode and to enter the top level menu. You
can use the Next/select key, the Previous key and the Browse
key to go through the menu. If the green light above the On-line
key is on, the printer is on-line; if this light is off, the printer is
off-line.
Next/select key To select an option or a setting in the menu. Or in case a
sub-menu is present, enter a menu on a lower level.
Previous key Press this key to go one level higher in the menu.
Browse keys These two keys are used to select another mode at the same level
of the menu, or to display the next or previous option from the
option list.
Stop key The red Stop key is used to stop the current print job.