Fibre channel sfp optical transceiver module, 4 fibre channel sfp optical transceiver module – Intel NetStructure MPCBL0001 User Manual
Page 90
90
Technical Product Specification
Order #273817
Intel NetStructure
®
MPCBL0001 High Performance Single Board Computer
Contents
4.2.3
Fibre Channel Small Form-Factor Pluggable (SFP)
Receptacle (J34 and J35)
AMP part number:
1367073-1
The MPCBL0001 SBC has two SFP receptacles that support either the copper or fiber module
interface. Fibre Channel connector J34 and J35 are available at the front panel. See
“MPCBL0001 SBC Connector Locations” on page 80
for its position on the board. See
“Fibre Channel SFP Pin Assignments” on page 91
for pinout information.
4.2.4
Fibre Channel SFP Optical Transceiver Module
Refer to the Intel NetStructure
®
MPCBL0001 Compatibility Report for a list of SFP optical
transceivers that have been validated. The report can be downloaded from
http://www.intel.com/design/network/products/cbp/atca/mpcbl0001.htm
Table 49.
Fibre Channel SFP Copper Transceiver Module (AMP, J34, J35)
USFibre Channel Connector (J34) Pin Assignments
Fibre Channel SFP Receptacle (J34, J35)
Fibre Channel CONNECTOR
Pin #
Signal Name
1
Signal Ground
2
Transmitter Fault
3
Transmitter Disable Input
4
Module Definition 2
5
Module Definition 1
6
Module Definition 0
7
Rate Select (not implemented)
8
Loss of Signal
9
Signal Ground
10
Signal Ground
11
Signal Ground
12
Received Data Out Bar
13
Received Data Out
14
Signal Ground
15
Receiver Power Supply
16
Transmitter Power Supply
17
Signal Ground
18
Transmitter Data In
19
Transmitter Data In Bar
20
Signal Ground