Intel NetStructure MPCBL0001 - Manual (Page 192)

192 Technical Product Specification
Order #273817
Intel NetStructure
®
MPCBL0001 High Performance Single Board Computer
List of Supported Commands (IPMI v1.5 and PICMG 3.0)
Table 109. PICMG 3.0 IPMI Supported Commands
Command Net Function Command Interface
Get PICMG Properties 2Ch 00h SMS/SMM/IPMB
Get Address Info 2Ch 01h SMS/SMM/IPMB
FRU Control 2Ch 04h SMS/SMM/IPMB
Get FRU LED Properties 2Ch 05h SMS/SMM/IPMB
Get LED Color Properties 2Ch 06h SMS/SMM/IPMB
Set FRU LED State 2Ch 07h SMS/SMM/IPMB
Get FRU LED State 2Ch 08h SMS/SMM/IPMB
Set IPMB State 2Ch 09h SMS/SMM/IPMB
Set FRU Activation Policy 2Ch 0Ah IPMB
Get FRU Activation Policy 2Ch 0Bh SMS/SMM/IPMB
Set FRU Activation 2Ch 0Ch SMS/SMM/IPMB
Get Device Locator Record ID 2Ch 0Dh SMS/SMM/IPMB
Set Port State 2Ch 0Eh IPMB
Get Port State 2Ch 0Fh SMS/SMM/IPMB
Compute Power Properties 2Ch 10h SMS/SMM/IPMB
Set Power Level 2Ch 11h IPMB
Get Power Level 2Ch 12h SMS/SMM/IPMB
NOTE: If a command is received over an invalid interface, a completion code of insufficient privilege level
(D4h) is returned.
Table 110. IPMI 2.0 Supported Commands
BMC Device and Messaging Commands
Command NetFn* CMD IPMI2.0 Spec Func
Get BT Interface Capabilities App 36h 22.9
Get Channel Authentication Capabilities App 38h 22.13
Get System GUID App 37h 22.14
Get Session Challenge App 39h 22.15
Activate Session App 3Ah 22.17
Set Session Privilege Level App 3Bh 22.18
Close Session App 3Ch 22.19
Get Session Info App 3Dh 22.20
Get AuthCode App 3Fh 22.21
Set Channel Access App 40h 22.22
Get Channel Access App 41h 22.23
Get Channel Info Command App 42h 22.24
Set User Access Command App 43h 22.26
Get User Access Command App 44h 22.27