IBM THINKPAD S05L-1270-01 - Manual (Page 703)

Using the Function Key: Each time you press the
Function key ( ), one of the following messages (called
On-Screen Message) appears at the top left corner of the
LCD.
The changed values are automatically saved when you
return to the “TV Channel” On-Screen message. The
values are not saved when you power-off the TV Tuner
without returning to this message.
Message
on LCD Parameter
(xx)
TV Channel
By using and , you can select the
channels from 2 to 69.
COL
Color Adjustment
By pressing and holding or , you can
change the color.
TNT
TINT Adjustment
By pressing and holding or , you can
change the tint.
BRT
Bright Adjustment
By pressing and holding or , you can
change the brightness.
CNT
Contrast Adjustment
By pressing and holding or , you can
change the contrast.
---
(No function)
Reserved.
LO
HI
Auto Tune Sensitivity Selection
LO : Means the sensitivity of the TV is
low. In this mode, the TV Tuner
receives strong TV signals only. To set
LO , press .
HI : Means the sensitivity of the TV is
high (factory default). In this mode, the
TV Tuner receives weak and strong TV
signals. To set
HI , press .
D3S
DON
Time On-Screen Message appears
D3S : On-Screen Message appears for 3
seconds. To set D3S , press .
DON : On-Screen Message always
appears. To set DON press
Common Devices Checkout 691