IBM THINKPAD S05L-1270-01 - Manual (Page 653)

Numeric Error Codes
Symptom or Error FRUs of the SelectaDock
Sequence of Actions
10X, 11X
101: Interrupt failure.
102: Timer failure.
103: Timer interrupt
failure.
104: Protected mode
failure.
105: Last 8042
command not
accepted.
107: NMI test failure.
108: Timer bus test
failure.
109: Low meg-chip
select test.
1. Adapter in slot (if
used).
2. Riser card.
3. Main card.
195
(The computer was docked
to the SelectaDock Docking
System while in hibernation
mode.) 1. Do the following
steps:
a. Turn off and
undock the
system.
b. Turn on and
shut down the
system.
c. Turn off and
dock the system.
1XX See the hardware
maintenance manual for
the computer. If the
problem persists, go to
“Undetermined Problems”
on page 653.
2XX
201: Memory data
error.
202: Memory line error
00–15.
203: Memory line error
16–23.
205: Memory test
failure on on-board
memory.
221: ROM to RAM
remap error.
1. See the hardware
maintenance manual
for the computer.
2. Main card.
3XX See “External Keyboard”
on page 629.
SelectaDock III (3547-003) 641