Motorola CAJUN P880 - Manual (Page 90)

2 - 56 Cajun P880 Routing Switch Installation Guide
2
3. From the Copy Source pull-down menu, select one of the
following:
—
Running-Config - To copy your running configuration
to your startup configuration, to a file located on the
switch, or to a file located on a TFTP server.
—
Startup-Config - To copy your startup configuration to
your running configuration, to a file located on the
switch, or to a file located on a TFTP server.
—
File - To copy a file stored on the switch to your running
or startup configuration, to a location on the switch, or to
a location on a TFTP server.
—
TFTP Server - To copy a file stored on a TFTP server to
your running or startup configuration or to a file on the
switch.
If you select File or TFTP Server, also provide the path and
filename of the source file in the Source Filename field.
4. From the Copy Destination pull-down menu, select one of the
following:
—
Running-Config - If you are copying your startup
configuration, or other file located on the switch or on a
TFTP server, to your running configuration.
—
Startup-Config - If you are copying your running
configuration, or other file located on the switch or on a
TFTP server, to your startup configuration.
—
File - If you are copying your startup or running
configuration, another file located on the switch, or a file
located on a TFTP server to a file on the switch.
—
TFTP Server - If you are copying your startup or running
configuration, or another file located on the switch, to a
location on a TFTP server.
If you select File or TFTP Server, also provide the path and
filename of the destination file in the Source Destination field.
5. In TFTP Server IP Address, enter the IP address of the source
or destination TFTP server, if applicable.
6. Click Copy. Your source configuration or file is copied to your
specified destination.