Motorola CAJUN P880 User Manual
Page 68
2 - 34
Cajun P880 Routing Switch Installation Guide
2
6. In Connection preferences, select the following:
—
From the
Data bits pull-down menu, select 8.
—
From the
Parity pull-down menu, select None.
—
From the
Stop bits pull-down menu, select 1.
7. Click Advanced. The Advanced Connection Settings dialog box
opens.
8. In Use flow control, click Software (XON/XOFF).
9. Click OK to close the dialog box. The Modem Properties dialog
box re-opens.
10. Click the Options tab. The Option tab opens.
11. In Connection control, click Bring up terminal window
after dialing and click OK. The Modem Properties dialog box
closes and the wizard continues.
12. In the wizard dialog box, click Next and enter the telephone
number you are calling.
13. Click Next. The wizard reports that you have successfully
configured a modem.
14. Click Finish. The wizard closes and the newly configured
connection displays in your Dial-Up networking program group.
15. Right-mouse click on your new connection and select
Properties. The Properties dialog box opens.
16. Click the Server Types tab and de-select all advanced options
except TCP/IP.
17. Click TCP/IP Settings. The TCP/IP settings dialog box opens.
18. Click Specify an IP Address and enter the IP address of the
serial port interface.
19. Click Server assigned name server addresses.
20. De-select Use IP header compression and Use default
gateway on remote network.
21. Click OK to close the TCP/IP dialog box.
22. Click OK to close the new connections properties dialog box.