Motorola CAJUN P880 - Manual (Page 54)

2 - 20 Cajun P880 Routing Switch Installation Guide
2
VLAN Binding Select the port’s VLAN binding type.
Refer to Table14 for more
information on VLAN binding
options.
Automatic VLAN
Creation Select to enable or disable the ability
to automatically create a VLAN each
time the port receives a frame from an
unknown VLAN. The default is
Disable.
VTP Snooping Select to enable or disable VTP
Snooping on this port. The default is
Disable.
Allow Learning Select to enable or disable the port’s
learning of new addresses. The default
is Enable.
Hunt Group Select a hunt group for which this
port will be a member. The default is
None.
Spanning Tree
Mode Select to enable or disable spanning
tree protocol on this port. The default
is Enable.
Fast Start Select to enable or disable fast start on
this port. The default is Disable.
Known Mode Select to enable or disable known
mode. The default is Disable.
3Com Mapping
Table Select how incoming tagged frames
from 3Com equipment are mapped to
Lucent VLANs. The default is
3ComDefault.
Mirror Port Displays whether the mirror port is
enabled or disabled. This is a Fast
Ethernet only option.
Table 12. Switch Port Configuration Parameters
Parameter Definition