beautypg.com

Required tools and hardware, Installing the system, Preventing electrostatic discharge – Motorola CAJUN P880 User Manual

Page 14: Required tools and hardware - 4, Installing the system - 4, Preventing electrostatic discharge - 4

background image

1 - 4

Cajun P880 Routing Switch Installation Guide

1

Required Tools and Hardware

The following items are required for installing the Cajun P880:

ESD grounding strap and an antistatic mat

Screws and nuts (#10-32 recommended depending on the
type of rack used)

Phillips head screwdrivers (type 1 tip)

Tape measure and a level (to check for squareness of rack and
mounting shelf)

Installing the System

The process for installing the system requires the following tasks:

1. Preventing Electrostatic Discharge

2. Installing the Mounting Shelf

3. Installing the Chassis

4. Installing the Power Supply

5. Connecting the Power Supplies

6. Installing the Modules

7. Installing the Cables

8. Installing the Cable Management Bracket

9. Powering On the System

10. Replacing Fan Assemblies

Preventing Electrostatic Discharge

Protect the modules against damage from electrostatic discharge
(ESD) by using a grounded ESD wrist strap while installing and
removing modules. While installing the P880 Cajun Switch:

1. Ground the unit. The unit is grounded through the power cord

when it is connected between the unit and the primary power
source.