Motorola CAJUN P880 User Manual
Page 20
1 - 10
Cajun P880 Routing Switch Installation Guide
1
2. After taking appropriate antistatic precautions, carefully remove
the supply from the antistatic wrap. (Refer to "Preventing
Electrostatic Discharge" for more information on proper
antistatic precautions).
3. Make sure that the ON/OFF switch on the power supply
is OFF. (O)
4. Remove the filler panel from the power supply bay. You can
insert new power supplies into any available bay. (Figure 6).
5. Insert the supply into the chassis and slide it in until it is firmly
seated (Figure 5).
Figure 5. Installing/Removing Power Supplies
WARNING
Support the bottom of the power supply with your free
hand.
6. Make sure that the power supply is seated firmly, with the
captive screw tightened.
7. Attach power cord and plug in.