beautypg.com

Displaying cooling system statistics, Configuring redundant hardware, Displaying cooling system statistics - 47 – Motorola CAJUN P880 User Manual

Page 81: Configuring redundant hardware - 47

background image

Cajun P880 Routing Switch Installation Guide

2 - 47

* Note: The power system settings only display 1400W of

available power with two or three power supplies
installed. A maximum configured switch requires a
maximum of two power supplies. A third power supply
may be added for redundancy in the event one of the
other power supplies fails. All three power supplies will
load-share during redundant operation. The remaining
power supplies will share the full system load, in the
event that the third power supply fails.

Displaying Cooling System Statistics

To display the switch’s cooling system status:

1. In the System Information section of the Web Agent window,

click

Cooling System. The Cooling System dialog box opens.

2. Ensure that all the individual components are operational by

checking the status column for each component.

3. If a component’s status is non-operational, power down the Caju

P880 Switch and contact a service representative to diagnose the
failing unit.

Configuring Redundant Hardware

The Cajun P880 switch provides a redundant controllers and
elements to ensure that if a controller or an element fails, the switch
will continue to route data properly. The redundant components are
available as separate options.

Total System
Power

Displays the total system power in Watts.

Current
Power
Available

Displays the current power available.

Table 26. Power System Statistical Parameters

Parameter

Definition