Motorola CAJUN P880 User Manual
Page 39
Cajun P880 Routing Switch Installation Guide
2 - 5
* Note: Information you enter at the Login and Password
prompts is case sensitive.
4. At the Login prompt, enter root. The password prompt displays.
Password:
5. At the Password prompt, enter root as the default password.
The command line interface prompt displays.
6. Enter the command
enable.
This changes the command mode
to privileged mode.
7. Enter the command
configure.
This changes the command
mode to configure mode so that you can use the
setup
command.
8. Enter the command
setup.
This initiates a series of queries.
Answer each query as follows:
a. When prompted to change the super user password, press
Enter to accept the default answer of Yes.
b. Enter your old password. The system then prompts you for
a new password. The default password is root.
c. Enter your new password, then re-enter the new password
to verify your choice.
d. Enter the IP address for the switch manager’s Ethernet
console.
e. Enter the subnet mask for the network’s IP address.