Logging into the web agent, Setting up user accounts – Motorola CAJUN P880 User Manual
Page 42
2 - 8
Cajun P880 Routing Switch Installation Guide
2
Logging Into the Web Agent
Although the Web Agent supports any frames-capable browser, the
system has been qualified with the following browsers:
■
Netscape Navigator 4.5 or later
■
Microsoft Internet Explorer 3.0 or later
To log in to the Web Agent:
1. Start your browser.
2. In the Location field, enter the URL of the switch you want to
manage
(for example: http://127.255.255.0). Remember that each
interface to the supervisor module (console or inband) has a
separate IP address. For Layer 3, this location can be that of any
of the router interfaces.
3. Press Enter. The login window opens.
4. Click Login. The Username/Password dialog box opens.
5. Enter a valid user name. The default super user name is root.
6. Enter a valid password. The default password is root. The Web
Agent window opens.
* Note: Change the root password for the system as soon
as possible to optimize security.
Setting Up User Accounts
User accounts set up in the system allow you to access both the
command line interface and the Web Agent. To add a user to this
interface:
1. Log in to the switch from your Web browser, using a user name
with administrator privileges. The default login of user
root,
password
root has this authority. The Web Agent application
window opens.
2. In the System Configuration section of the Web Agent
window, select
User Logins. The User Account Management
dialog box opens.
3. Click Add User. The Add User Account dialog box opens.