Motorola GT10 - Manual (Page 95)

GT10/GT30 5.1 GT10 Configuration Settings
72
5.1 GT10 Configuration Settings
Before using the GT10 for the first time, it must be set up by entering the GT10
configuration settings indicated below. Always check and enter the settings under
“Basic communication area to PLC”. For instructions on setting up the GT10, see page
29.
5.1.1 Two Types of GT10 Configuration Settings
1. Entering configuration settings from GTWIN screen creation tool page 73 . .
With this method, GT10 configuration settings are entered from GTWIN screen creation
tool, and the GT10 configuration file is sent to the GT10. Most items can be set using
this method.
GTWIN
GT10
GT10
configuration
file sent
2. Entering configuration settings from the GT10 main unit page 85 . . . . . . . . . .
Some of the settings, such as the communication parameters, the internal clock, and
adjustments of the liquid crystal display contrast, can be set using the system menu of
the GT10. Settings are entered using the touch switches on the front of the panel.
GT10
EXPLANATION
Items in the GT10 Configuration Settings
Items that can be set from GTWIN
Items that can be set
either way Items that can be set from the
GT10 system menu
Title setting Communication parameters
Clock division setting for the internal
clock
Type of PLC connected LCD contrast setting
Basic communication area to PLC Communication parameters
Communication parameters Memory initialization
Auto–paging screen settings Self–diagnosis
Startup screen (default screen) settings
Reference destination setting for clock
Backlight control
Touch sounds
Hold PLC device
GT internal device hold