Motorola GT10 - Manual (Page 181)

GT10/GT30 10.2 Booting GTWIN
158
10.2 Booting GTWIN
Click on the Windows button and then select “Program”, “NAiS Terminal”, and
“GTWIN” on the displayed Windows menu, in that order.
10.2.1 Selecting the Working Menu
When GTWIN is booted, a startup menu like that shown below is displayed on the
screen. Turn on one of the three radio buttons and click on [OK].
Create New File
Select this to create new screen data.
Open Existing File
Select this to read and edit screen data
saved to a disk.
An Open File dialog box is displayed on
the screen. Select a file to edit.
Read From GT
Select this to read and edit screen data
saved to the GT10.
10.2.2 Selecting the Model
If “Create New File” or “Read From GT” is selected from the startup menu, a dialog box
like that shown below is displayed, where the model can be selected. Click on the
pull–down list button [
] to the right of the display window, and select the model of PLC
or GT being used. Then click on [OK].
PLC Model
– Matsushita MEWNET–FP Series
Select this if the GT10 is connected to the MEWNET–FP Series.
– General–Purpose serial
Select this if the GT10 is connected to a general–purpose RS232C device such as a personal comput-
er or microcomputer board.
– Mitsubishi FX series
Select this when connecting to the FX series of PLCs made by Mitsubishi Electric.
– Omron C series
Select this when connecting to the C series of PLCs made by Omron Corporation.
GT Model
– GT10 monochrome
– GT10 (vertical) monochrome
– GT30 Monochrome
– GT30 color