2 connecting to the tool port, Connecting to the tool port, Fp σ communication format settings – Motorola GT10 User Manual
Page 66
GT10/GT30
4.1 Connecting the FP–Sigma
43
CAUTION
Because loose wiring is used for connection to the FPΣ COM. port, no
dedicated cable is available. The cable should be provided by the
customer. When purchasing a cable, the following precautions should
be observed:
Shielded wire with a size of AGW#28 to 16 (conductor
cross–section surface area: 0.08 mm
2
to 1.25 mm
2
) should be used
for connections.
For wiring procedures, please refer to “Wiring the COM. Port” on
4.1.2
Connecting to the TOOL Port
AIGT8192
GT10
FPΣ TOOL port
GT30
FPΣ communication format settings
System register no. Item
Value Set
410
TOOL Port
Unit number
1
412
Modem connection
No modem connection
413
Data length
8 bits
Parity check
Yes, Odd
Stop bits
1 bit
Line return code
CR (Fixed)
Start code
no STX (Fixed)
415
COM. Port 1
Communication speed setting
19200 bits/s